Hanna Instruments HI 98280 - Manual (Page 50)

50
Chapter 7 - GLP DATA
GLP (Good Laboratory Practice) is a set of functions that allows to store or recall
data regarding the probe calibration. This feature also allows to associate a
reading to “certified data” (standard solutions, reference meters, etc.) through
the calibration procedure.
To visualize GLP data, from measurement mode
press the <Menu> softkey and highlight the “GLP
data” option using the down arrow key.
Press <OK> and the complete list of available
parameters appears. Select the desired option us-
ing the arrow keys and press <OK> to view the
relative information.
Note Note Note Note Note When no calibration data are available
for the selected parameter, the display
shows the message “No GLP data avail-
able for this measurement”. Press
<OK> to return to the previous screen.
7.1 PROBE INFORMATION
• To view the probe information, select the “Probe
information” option and press <OK>.
• The following data appear: model, firmware ver-
sion, ID and serial number.
• Press <OK> to return to the previous screen
or <Modify ID> to change the ID code.
• If <Modify ID> is pressed, a text box appears.
Insert the desired code, then press <OK> to
confirm or ESC to escape without saving the
modification.
• The messages “Storing data on probe, please
wait...” and “Data successfully stored on probe”
appear.
• Press <OK> to return to the “Probe informa-
tion” screen.
Note Note Note Note Note If no probe is connected a warning mes-
sage appears.