Hanna Instruments HI 84102 - Manual (Page 10)

10
This error message appears when the sample concentration exceeds
25g/L.
GUIDE TO DISPLAY CODES
Main screen display with stirrer active.
Main screen display.
This prompt appears for a few seconds each time the instrument is
turned ON.
This screen appears each time the meter enters pump calibration
mode. The meter is ready to start pump calibration by pressing the
START STOP button.
This screen appears while pump calibration is in progress. Pressing
CAL PUMP or START STOP button, the minititrator returns to the
main screen.
This prompt appears for a few seconds before returning to the
main screen, when pump calibration is done.
Purging mode message.
PUMP CALIBRATION MESSAGES