Hanna Instruments HI 9141 - Manual (Page 18)

35 34
ACCESSORIES
HI 76407/4 DO probe with 4 m (13') cable
HI 76407/10 DO probe with 10 m (33') cable
HI 76407/20 DO probe with 20 m (66') cable
HI 76407A/P Spere membrane (5 pcs)
HI 7041S Refilling electrolyte solution,
30 mL
HI 710005 115 Vac/12 Vdc power adapter
HI 710006 230 Vac/12 Vdc power adapter
HI 710034 Paper roll (10 pcs)
HI 710035 Ink cartridge
HI 9200 Infrared transmitter
HI 92000 Windows ® compatible software
Windows ® is registered Trademark of "Microsoft Co."
Recommendations for Users
Before using these products, make sure that they are entirely
suitable for the environment in which they are used.
Operation of these instruments in residential area could cause
unacceptable interferences to radio and TV equipments, requiring
the operator to take all necessary steps to correct interferences.
Any variation introduced by the user to the supplied equipment
may degrade the instrument's EMC performance.
To avoid electrical shock, do not use these instruments when
voltages at the measurement surface exceed 24 Vac or 60 Vdc.
To avoid damages or burns, do not perform any measurement in
microwave ovens.
In particular cases the meters could turn off. In such cases, the
meters can be turned on by pressing the ON/OFF key.
HI9141 and HI91410 can also be used with
other adapters. In this case, remember to
check the correct polarity of your adapter
before connecting it to the meter.
WARNING: In HI91410, if the external power
supply and batteries are discon-
nected, all stored data will be
erased. Always apply external
power supply to the instrument
before replacing the batteries, to
prevent data from being lost.