Hatteland Display 13 inch - HD 13T21 MMC (Widescreen, Inte Ato CPU) User Manual

Page 10

Advertising
background image

DOC101014-1_Hatteland Display API_AIPC.docx rev: 7

Created: 17.11.2011

Modified: 07.10.2013

10 of 27

Hatteland Display AS, Åmsosen, N-5578 Nedre Vats, Norway

Tel: (+47) 4814 2200 - [email protected] - www.hatteland-display.com

Hatteland Display API

All intellectual properties belongs to Hatteland Display AS

BACK_LIGHT_ADJUSTMENT

function.

3.3.1.4 Watchdog and alarm control
Functions

R/W Inpu

t

Output

Functionality

WATCHDOG_MONITOR_ENABLE WO

0x00 -

Will enable the watchdog.

WATCHDOG_MONITOR_ENABLE
_WAIT

RW

0xXX 2 bytes

Get / Set the countdown, in seconds,
before watchdog is enabled.

WATCHDOG_MONITOR_COUNT

_RESET

WO

0x00 -

Will abort the MONITOR_ENABLE

countdown.

ALARM_RESET

WO

-

-

Turns on Error LED.

Turns off K1 relay.

Turns off HS1 switch.
Turns off Buzzer.

ALARM_FAULT_TEST

WO

-

-

Turns on Error LED.

Turns off K1 relay.
Turns off HS1 switch.

Turns on the Buzzer.

ALARM_SOUND_OFF

WO

-

-

Turns off the Buzzer.

ALARM_ACK

WO

-

-

Turns off the Buzzer.
Turns off the Error LED.

IO_STATUS_RETURN

RW

0xXX 1 byte

Get / Set the entire byte instead of

polling each bit.
Bit 0 = Error LED,

Bit 1 = K1,

Bit 2 = HS,
Bit 3 = Buzzer,

Bit 4 = 5V input status

ERROR_LED_EN

WO

-

-

Will activate the error LED in the
front of the display.

ERROR_LED_DIS

WO

-

-

Will deactivate error LED in the front

of the display.

K1_EN

WO

-

-

Will activate the K1 relay, thus

connecting “COM” to “NO” on “X1-

DIG-OUT”. (5 pins non-stacked

connector)

K1_DIS

WO

-

-

Will deactivate the K1 relay, thus

connecting “COM” to “NC” on “X1-

DIG-OUT”. (5 pins non-stacked
connector)

HS_EN

WO

-

-

Will activate the HS1 switch if

AIPC_HS1_EN is active.

HS_DIS

WO

-

-

Will deactivate the HS1 switch. Not

that AIPC_HS1_DIS will also

deactivate the switch.

BUZZER_EN

WO

-

-

Will turn on the buzzer.

BUZZER_DIS

WO

-

-

Will turn off the buzzer.

3.3.1.5 Touch Pad LED Display with sensor
Functions

R/W Input

Output

Functionality

PAD_LED

RO

-

1 byte

The PAD_LEDs are the illumination of the

touch buttons in front of the display. This

Advertising
This manual is related to the following products: