SoundMax SM-CMD2023 - Manual (Page 16)

16
Digital tuner
Choose Radio Band
Press MOD button to access the radio function. Press BND button to select the needed radio band. The unit comes
with five bands- three FM Bands (FM1, FM2, and FM3) and two AM Bands (MW1, and MW2). Each of the five bands
can store up to six preset stations, for a total of 30 preset memory stations.
Radio Tune / Seek Function
In Radio Mode, press SEEK+/- button to select a station downward or upward sep by step. Press and hold SEEK +/-
button for more than 1 second, the radio will seek to the next up or down strong and clear frequency station. Repeat
this action to seek for other desired stations.
Mono/Stereo Reception Control
In FM radio mode, press the ST/PROG button to select stereo or mono reception. Or press and hold SEL button, then
press it until ST is seleted; rotate the VOLUME knob to select Stereo or Mono.
Local/Distance Control
In radio mode, press the LOC/RDM button to select local or distance reception.
Local and distance reception setting can facilitate the radio reception, depending on the location in which the radio
is being used.
Save Your Preset Stations
There are six numbered preset buttons, which can store and recall stations for each band. While listening to a radio
station you would like to save as a pre-set, press and hold one of the buttons numbered 1-6 until you hear a beep.
The button you pressed is now the pre-set button for that station.
Automatic Store/Preset Scan
A. Automatic Scan & Store
While listening to the FM Radio, press and hold the APS Button for 3 seconds. The receiver will automatically scan
and save 6 stations for the current band. To stop auto store press this button again.
B. Scan Saved Stations