SoundMax SM-CMD2023 - Manual (Page 21)

21
Zoom +/-
Press the ZOOM button on the RC to perform the zoom function. The zoom range is from 1/4 up to 4 (total 7 stages),
according to the zooming intensity.
Slow Motion
Press SLOW button on the RC to perform slow motion of the video play. SF 1/2 up to 1/7 will be shown, according
to the slowness. Cycle back to normal playback of press the Play/Pause button to resume.
Multi-Angle View
Press the ANGLE button on the RC to perform multi-angle playback. The numbers of angles change in sequential
order.
Note: The number of angles is different according to the disc.
The function only work for discs having scenes recorded at different angles. When no different angle is recorded, the
OSD will show “INVALID KEY”
Video System
Press the BND/NP/SUB button on the head unit or BND/SYS RC to choose between NTSC, PAL, PAL60, AUTO,
according to the encoding format of the disc. The default mode is AUTO. Use this function if there is something
wrong about the display function (e.g. no color is display).
Program Mode
Press ST/PROG button on the RC to set the program play. Use the Navigation and Digit keys to set the Chapter and
Track no. as your desired sequence. Press Enter to begin the program play. Press this button and confirm a blank
program again to cancel this operation.
Electronic Shock Protection
This unit is programmed with Electronic Shock Protection (ESP) so that the signal will be protected against rough
roads - 5 seconds.