SoundMax SM-CMD2023 - Manual (Page 19)

19
OSD (Display information)
Press the OSD button (by pressing and holding button 1 on the front panel, or pressing the OSD button on the RC)
so that the OSD will be displayed on the monitor. Details such as title, track, playtime, etc, will be shown. Press
again to turn the OSD off.
Selecting Tracks
Press NEXT button to go to the next track. Track numbers will be shown on the display. Press and hold NEXT button
to fast forward. Press PREVIOUS button to go to the previous track. Track numbers will be shown on the display.
Press and hold it to fast reverse. Press PLAY/PAUSE button to resume to nomrl play.
Playing the DVD (without menu)
After the disc is loaded, the movie of the DVD will be played automatically. The menu will be prompted so that you
can choose the setting. Press PBC/MENU button on the RC during playback so that the menu will be shown. The disc
will go back to the opening screen if PBC/MENU button is pressed.
Title Playing
Press the TITLE button on the RC so that the first title track of the DVD will be played. After playing, the current
running track will be resumed.
Button 1: Left + Display OSD
The number 1-6 buttons contains dual functions during Disc play. After pressing the Setup button (button 6 on the
head unit), the setup menu will be prompted. Then the number button is for navigating and confirming the
commands. Press the No.1 Button to navigate the setup menu leftward. Press and hold the button for 3 seconds for
OSD functions, so that disc details will be displayed.
Button 2: Right + Repeat
Press the No.2 button to navigate the setup menu rightward. Press and hold the button for 3 seconds for repeating
the same track continuously. “RPT” will appear on the display. Press and hold this button again to stop repeating.
Button 3: Up + Scanning Tracks