HITEC DPC-10 - Manual (Page 13)

13
Hitec Brushless Servo PC Programming Interface
DPC-10
DPC-10 Software Operating Manual
Loading Files
Restoring Factory Defaults To restore the servo to the factory default
setting, click on “OPEN” and navigate to the
directory where you unzipped the DPC-10
software download. In the directory “Factory
Defaults,” you will find the files for each servo
model. Click on the file that matches the servo
you want to restore and click on “Open.” Once
you get the file load has completed message,
click “OK.” Now click “Write All” to load the
setting onto the servo. Once you get the Write
All completed message, click “OK.” The default
parameters have been written to the servo.
WARNING – Restoring a factory default file other
than the one specifically made for your servo may
result in undesired operation.
WARNING
WARNING
Help is available from the Hitec office
through phone support and e-mail. Our US
office is generally open Monday thru Friday,
8:00AM to 4:30PM PST.
Phone: (858) 748 - 8440
E-mail: [email protected]
Web: www.hitecrcd.com
completed” message, click “OK.” The parameters
have been written to the servo.