HITEC DPC-10 - Manual (Page 2)

2
Hitec Brushless Servo PC Programming Interface
DPC-10
DPC-10 Software Operating Manual
WARNING – Failure to follow these instructions
can result in an undesired operation of your servo.
Please read these instructions before attempting to
program your servos.
WARNING
WARNING
Section 1
The DPC-10 BLDC Programming Software gives the
user of Hitec brushless servos the unparalleled ability
to adjust the parameters of their servos. Additionally
users can test their servos, save parameters to a
file, load parameters from a file or restore the factory
settings from a file. About the Software
Test Functions Testing a servo’s function can be critical to
completing a successful project. Use these tests
to “burn-in” new servos or to check for broken
gears and other issues. The DPC-10 is capable of
performing the following tests:
1. Servo Travel using one of the following methods:
a. Manual Positioning
b. Automatic Sweep Positioning
c. Step Positioning
2. FAIL SAFE programming position
Connection
Indicators
File Operations
Buttons
Connection
Buttons
Servo
Information
Programming
Section
Testing
Section
Write/Read
Buttons
Programming Functions