JUGS Sports Super/Softball Pitching Machine - Manual (Page 13)

JUGS is shipped with the base secured tightly to the “top” of the machine.
1. Separate the top of the machine from the base.
•
Loosen the horizontal T-Clamp.
•
Grasp the lifting handle and pull the top of the machine off the base.
This can be done very simply with one person holding the “top” and
second person holding the base.
Assembly
11
Unpacking
WARNING: To prevent accidental starting or electrical shock that could
cause possible serious injury, assemble all parts to your
machine before connecting it to the power supply. The
pitching machine should never be connected to a power
supply when you are assembling parts, making adjustments,
cleaning, servicing, or when not in use.
•
Carefully lift machine from carton and place on level surface.
•
Make sure you have all the parts (See Figures 3-4). If any parts are
missing, do not operate the machine until the missing parts are replaced.
Failure to do so could result in possible serious personal injury.
•
Do not discard the packing materials until you have carefully
inspected the machine, identified all the parts, and satisfactorily operated
the machine.
NOTE: If any parts are damaged or missing, do not attempt to plug in the
power cord and turn on switch until the damaged or missing parts are obtained
and are installed correctly.