JUGS Sports Super/Softball Pitching Machine - Manual (Page 14)

2. Install the Legs:
A. Place the Leg Clamp Casting on the Base
Casting so that the leg slots line up.
B. Place the Base T-Clamp through the hole in
the Leg Clamp Casting and turn clockwise
until the T-Clamp engages the threads of
the Base (see Figure 4).
C. Slide the three legs into place. Be sure the
end of each leg is completely inserted and
in contact with the back of the assembly.
D. Hand tighten the Base T-Clamp and set the “bottom” of the machine
on its legs.
E. I f the legs appear wobbly:
•
Make sure the legs are snug and properly
placed in the base.
•
Make sure the Base T-Clamp is turned as
tightly by hand as possible.
•
Be sure the legs are equidistant from one
other (Figure 5).
12
Figure 4.
Figure 5.
Assembly