JUGS Sports Combo (2 wheel) Pitching Machine - Manual (Page 14)

Transporting
12
Unpacking
WARNING: To prevent accidental starting or electrical shock that could
cause possible serious injury, assemble all parts to your
machine before connecting it to the power supply. The
pitching machine should never be connected to a power
supply when you are assembling parts, making adjustments,
cleaning, servicing, or when not in use.
1. Carefully lift machine from carton and place on level surface.
2. Make sure you have all the parts. (See Figures 3-4.) If any parts are
missing, do not operate the machine until the missing parts are replaced.
Failure to do so could result in possible serious personal injury.
3. Do not discard the packing materials until you have carefully inspected the
machine, identified all the parts, and satisfactorily operated the machine.
NOTE:
If any parts are damaged or missing, do not attempt to plug in the power cord
and turn on switch until the damaged or missing parts are obtained and are
installed correctly.
•
To move the pitching machine, slowly tip machine over until tires rest on
the ground. Grasp and lift two legs and roll on wheels to new position as
you would a wheelbarrow. The JUGS pitching machine will fit in the trunk
of a car by removing it’s legs.
•
Do not roll tires on surfaces that might damage the tire. If the tire becomes
deformed, flat, or damaged, it must be repaired or replaced before using
the machine. (See tire specifications, Page 28.)
WARNING: Never leave pitching machine unattended.