Kent Edg 28B - Manual (Page 6)

INSTRUCTIONS FOR USE ENGLISH
Edge 28B 146 3082 000(2)2007-06 3
OTHER REFERENCE MANUALS
Spare Parts List (supplied with the machine)
Service Manual (that can be consulted at Kent Service Centers)
SPARE PARTS AND MAINTENANCE
All necessary operating, maintenance and repair procedures must be carried out by qualifi ed personnel or by Kent Service
Centers. Only original spare parts and accessories must be used.
Contact Kent for service or to order spare parts and accessories, specifying the machine model and serial number.
CHANGES AND IMPROVEMENTS
Kent constantly improves its products and reserves the right to make changes and improvements at its discretion without being
obliged to apply such benefi ts to the machines that were sold previously.
Any change and/or addition of accessory must be approved and performed by Kent.
OPERATION CAPABILITIES
This sweeper has been designed and built to clean (by sweeping and vacuuming) smooth and solid fl oors, in civil and industrial
environments and to collect dust and light debris under safe operation conditions by a qualifi ed operator.
CONVENTIONS
Forward, backward, front, rear, left or right are intended with reference to the operator’s position, that is to say with the hands on
the handlebar (6).
UNPACKING/DELIVERY
When the machine is delivered, check that the packing and the machine were not damaged during transportation. In case of
visible damages, keep the packing and have it checked by the Carrier that delivered it. Call the Carrier immediately to fi ll in a
damage claim.
Check that the machine is equipped with the following features:
Technical documents:
Sweeper Instructions for use Manual
Sweeper Spare Parts List
No. 1 vacuum system motor fuse
–
–
–
•
•
•