Kipp&Zonen Brewer MkIII - Manual (Page 67)

MKIII OPERATOR'S MANUAL 64
Approximate run times for the following measurements are shown below:
HG (without 7-9 min.
SL(without B2) 9 min
DS 3 min
ZS 4 min
UV 8 min
UX 6 min
UM Indeterminate must be aborted with
HOME key or new schedule entry
FM 11 min
Writing Schedules:
• Determine the Scientific Objectives, and draw up a table of Solar Zenith Angle vs.
Commands.
• Use the SA command to assist in relating to local time.
• From the Brewer main menu, send the Command SE.
• a table will appear on the screen with two columns, one for SZA, and one for the commands
to be executed at the SZA.
•
starting with the first SZA after solar midnight (it will probably be -ve), enter the SZA in the
left hand column of the table, and enter the commands to be executed at that angle in the
right hand column.
•
carry on through the day, remembering that the SZA changes to +VE after noon (no sign
defaults to +ve).
• when the schedule is finished, press Ctrl+End and follow the instructions for saving the
schedule.
• the schedule can be tested using the SK or SKC routines.