Konig Electronic 8:1 universal remote control - Manual (Page 11)

11
OPERATING INSTRUCTIONS GB
König KN-URC80B universal remote control
We congratulate you on the purchase of a König universal remote control. Your new remote control replaces the
original remote control of your TV, the remote control of your satellite receiver or DVB-T / cable box (also referred
to as STB in the following) as well as that of your Bluray or DVD player / recorder. Moreover, with your KN-
URC80B you can also operate your audio equipment such as CD player (CD), cassette recorder (TAPE), radio or
tuner (TUNER) or an amplifi er (AMP).
Read all instructions carefully and retain the instructions for reference at a later date.
You can program your remote control using the operating instructions and the associated code and brand list, via
the following methods:
a)
by manual programming, by entering a four digit code from the code list,
b) by automatic programming, depending on the brand, by entering the three digit code from the brand list
c) by an automatic searching
d) or by programming the original remote control codes.
We recommend starting by using the manual programming method (a).
Inserting and replacing the batteries
Your KN-URC80B remote control is powered by two 3-Volt lithium batteries (CR 2032). Insert the batteries in
accordance with the markings on the battery compartment. Please take extra care to ensure correct polarity.
Dispose of the old batteries in accordance with local regulations.
Note
:
Your KN-URC80B has an internal memory to make sure that the programming is retained after changing the
batteries.
We recommend that you always use new batteries. Never combine old and new batteries because the
performance of your remote control and the service life of the batteries will be negatively affected.
General information
Your KN-URC80B is fi tted with a 5 second protection mechanism. When programming, you must press a button
within a period of 5 seconds, otherwise the remote control reverts back to its regular operating mode.
Note
:
A short double fl ash of the signal LED confi rms the input, a long fl ash indicates cancellation.
If you enter a code number incorrectly, press any key and wait for a long fl ash of the signal LED. You can then
continue entering according to the instructions.
BA König KN-URC80B, 135x215 mm CS6.indd 11 BA König KN-URC80B, 135x215 mm CS6.indd 11 12.09.2012 10:55:52 12.09.2012 10:55:52