Konig Electronic Duo-pack wireless interconnectable smoke alarm User Manual
Page 2
ENGLISH
2
Introduction
This battery operated optical smoke alarm sends out a signal through radio
frequency to activate other installed SAS‑SA200/2002’s in case smoke is detected.
When installing multiple SAS‑SA200/2002’s, the smoke alarm that detects smoke will
automatically activate all other SAS‑SA200/2002’s to give an early warning audible
alarm. This provides extra time to leave the house. Equipped with a learn button and
a test button for periodic testing.
A smoke alarm has a limited life and should always be replaced 10 years after the
date of purchase. Write the purchase date on this manual for future reference.
The smoke alarm complies with the EN14604 standard of the Construction Products
Directive.
• We recommend that you read this manual before you install the smoke alarm
• Keep this manual in a safe place for future reference
Safety precautions
Do not expose the product to water or moisture
Do not paint over the smoke alarm
Packaging content
• 1x Smoke alarm
• 1x 9 V battery
• 3x 1.5 V AA batteries
• 1x Mounting material
• 1x Manual
Table of contents
• Introduction 2
• Safety precautions
2
• Packaging content
2
• Technical specifications
3
• Product and user description
3
• Installation instructions
6
• Maintenance 8
• Warranty 8
• Disclaimer 8
• Disposal 8