Labconco CentriVap Complete Vacuum Concentrator 73150 Series - Manual (Page 26)

Chapter 6: Accessories for Your CentriVap Complete
Product Service 1-800-522-7658 22
Original instructions
PART # DESCRIPTION
7461900
7461901*
Rotor (96 well plate)
Holds (4) Standard 96 well plates or
(2) Deep well 96 well plates
7460900 Clear Canister – Accommodates inserts listed below
7814800 Acid Trap Insert
7814900 Moisture Trap Insert
7995600 Ammonia Trap Insert
7815000 Radiochemical Trap Insert
7815200 Solvent Trap Insert
Installing a Vacuum Gauge
A user-supplied vacuum gauge may be attached to the CentriVap to monitor the
vacuum level. Attach the vacuum gauge to the barb end of the Quick Disconnect
Coupling fitting that was supplied with the CentriVap using a length of suitable
rubber hose. The Quick Disconnect Coupling fitting can then be pushed into the
mating connector on the rear left side of the CentriVap. The Quick Disconnect
Coupling fitting can be removed from the mating connector by pressing on the tab
on the connector and then pulling out the Quick Disconnect Coupling fitting.
Always remove the Quick Disconnect Coupling from the CentriVap when a
vacuum gauge is not attached to it.
USER SUPPLIED
VACUUM TUBING