Laerdal Extri Kelly - Manual (Page 5)

Item Included:
(1) Extri Kelly Manikin
(1) Laerdal Global Warranty Booklet
(1) Directions for Use
Skill Taught:
• Extrication
Head: Head is connected to torso by a long bolt at base of
neck, secured with a wing nut. Remove chest plate from
torso and unscrew wing nut. Head will slip out of torso.
Chest Plate: Chest plate fits into torso by a ledge on plate
and corresponding groove on torso cavity. Remove plate
by applying pressure to center of plate and working your
fingers under edge of plate and lifting out. To insert,
position plate over cavity and work edges into groove on
torso cavity.
Belly Plate: Belly plate fits into lower torso by a ledge on
plate and corresponding groove on abdominal cavity.
Remove plate by applying pressure to center of plate and
working your fingers under edge of plate and lifting out. To
insert, position plate over cavity and work edges into
groove on abdominal cavity.
Laerdal Recommends
When assembled, talcum powder should be used in
joints to assist articulation.
Waist, Elbow, Knee and Ankle Joints:
A bolt and lock nut connect these joints.
To remove:
Laerdal Recommends
When assembled, talcum
powder should be used in
joints to assist articulation.
1. Unscrew lock nut.
2. Pull bolt out of joint.
The segments will now
easily disconnect.
101-10001 Laerdal 5