Infant virtual i.v, Setting up the system – Laerdal Infant Virtual I.V. User Manual
Page 23
Advertising
![background image](/manuals/738817/23/background.png)
Setting up the System
23
www.laerdal.com
Infant Virtual I.V.
Directions for Use
(3) Plug in the USB cord of the haptic device into the computer, but do not connect to haptic device:
(4) Remove the haptic device and needle holder from the packaging:
(5) Completely remove the restraining strap carefully from the haptic device:
(6) Remove the haptic device needle from the software packaging and plug it into the connector at
the back of the haptic device.
(6) Remove the haptic device needle from the software packaging and plug it into the connecto
the back of the haptic device.
Advertising