Laerdal Multi-Venous IV Training Arms - Manual (Page 6)

Fig. 2
Replacing veins: (Keeping skin)
1. Lubricate inside of skin with liquid detergent; let it
flow down into the finger area.
2. Begin at top of arm and slowly pull skin down and off
of arm. Do not roll, as that will cause skin to
bind. Thumb will detach with skin.
3. Remove tubing from track in mandrel. Glue may
need to be scraped away to allow removal.
4. Rinse and dry vein grooves well and swab with
alcohol. Be sure to remove any excess glue.
5. Place new veins along grooves, (Figure 3) spot gluing
as needed. (We recommend a fast-drying glue.)
Fig. 3
6. Generously lather arm mandrel with liquid soap.
Laerdal Recommends
Heat arms skins before replacing on mandrel. This
can be done with a blow-dryer
.
375-50001 Laerdal 6