Laerdal Pediatric Multi-Venous IV Training Arm Kit - Manual (Page 6)

Care and Maintenance:
1. Clean with mild soap and water; do not submerse
manikin or parts in cleaning fluids or water.
2. Use only on clean surface. Avoid felt tipped
markers, ink pens, acetone, iodine or other staining
products and avoid placing the manikin on
newsprint or inked lines of any kind.
3. To ensure longevity, each manikin and module
should be cleaned after each training session and a
general inspection should be conducted regularly.
4. Modules and all other parts should be drained and
air-dried thoroughly before storage and disinfected
when needed. After use of injection pads (use water
only), accumulated water should be squeezed out.
Do not store wet foam pads in the skin. To
prevent mildew or mold, pads can be soaked in a
mild solution of disinfectant and water or bleach and
water. Squeeze excess solution from pads, allow
them to dry, then store or reinsert in manikin.
5. Articulating parts will benefit from a light application
of talcum powder prior to training sessions.
6. Store properly between teaching sessions.
375-71001 Laerdal 6