Laerdal Resusci Anne Skills Station Standard - Manual (Page 13)

Laerdal License Server Administrator’s Guide
www.laerdal.com 13
Laerdal License Server Administrator’s Guide
If your organization’s information changes or you wish to change
the reporting options, you must enter the changes in the “Provider
address” screen that displays after selecting “Reporting options”.
Note: This is very important as the address provided here is where the AHA
cards will be sent. The information entered here will show up exactly as
entered on the AHA completion cards issued by the Laerdal Training Center
(if this option is selected).
note: If there is a Proxy server between the License Server and the
Laerdal.com site then you must configure the Proxy settings in the
“Reporting options” selection above the “Users” section. After changing
these settings, you will need to reboot.
Please review the relevant software administration guide for more
information on AHA course completion cards and reporting to the
Laerdal training Center.
Progress Reports
It is also possible to create and print reports which can be used for
internal administration. the reports can be used to create an overview
of who has finished certification, who is in progress and who is coming
due for recertification.
this report can be found in the “Manage user” menu by selecting
“Progress report”.
to print a report with results from Resusci Anne skills station, please
use the report printing facilities in CMs.
Recertification
Users will be prompted to recertify after a certain period of time. By
default the License server is set to prompt for recertification 9 months
after completion of the course. the recertification time frame can be
changed under “Recertification options” in the License server (For
HeartCode ACLs, the default is set to 18 months).
laerdal_network_installation_guide_license-server_dvd-booklet.indd 13 30/03/09 8.45