Laerdal VitalsBridge - Manual (Page 26)

VitalsBridge Directions for Use
25
rev. B.7 PN 10229
The VitalsBridge instrumentation has 4 LEDS: Power, battery/charge, WLAN and LAN.
- Power indicator:
o no light: switched off, or switched on and no power to the VitalsBridge
o solid: switched on and power available to the VitalsBridge
- Battery/charge indicator:
o no light: VitalsBridge is not running
o solid: VitalsBridge is on, battery charge > 15%
o flashing every 1 second: unit is running on low battery charge < 15%
- WLAN or LAN:
o no light: not connected to router
o solid: VitalsBridge connected to the manikin’s internal router
o flashing ~ 1x/second: VitalsBridge connected to router and is trying to associate a
connection
o flashing on/off frequently: VitalsBridge receiving/sending from/to a SimMan 3G
Step 5: Run the VitalsBridge software: Double click on the VitalsBridge icon, labeled VitalsBridge,
located on the computer's desktop.