LG Motorsports LG G5 Chassis Brace - Manual (Page 3)

Figure 1: Center tunnel brace removal.
Install:
To begin the install start at the rear of the car mocking up one side of your chassis
brace to familiarize yourself with the bolt locations that you will be using. We will be
using all factory hole and nut locations on the car so no drilling is required into your car
for this install.
Figure 2: Rear subframe mockup
First we will need to install the four supplied nut plates into the chassis. The two
small single nut plate pieces will go on the outside part of the frame and hold in the one
single bolt location outside of the fuel tanks.