Lingenfelter L460145297 Lingenfelter LNC-2000 LS Timing Retard Launch Controller v2.0 - Manual (Page 25)

Ground
85
86
30
87a 87
MicroEDGE+
Driver
Module
Ground
Ground
+12 Volts
Switched
LNC-2000
Red = MAP +5V
Black = MAP/Linear Ground
Purple = MAP/Linear Signal
F = Linear Mode
.2 Volt = 0*
4.8 Volt = 15*
Max Retard
To +12V Side of Nitrous Solenoid
To +12V Side of Fuel Solenoid
To the Ground
Side of the
Solenoids
30 Amp
Fuse
+12V from Battery
LNC-2000 Receiving +12V Retard Activation Input from the Harris Speed Works MicroEDGE+
(Using a Single Nitrous Stage)
In order to use the LNC-2000
with the MicroEDGE+ controller,
the stage that the LNC-2000 is
connected to CAN NOT be
progressively controlled.
Stage 1 Relay
The MicroEDGE+ name is property of Harris Speed Works Inc.
LNC-2000 Receiving +12V Retard Activation
Input from the Nitrous Express MAXIMIZER 4
LNC-2000
Red = MAP +5V
Black = MAP/Linear Ground
Purple = MAP/Linear Signal
F = Linear Mode
.2 Volt = 0*
4.8 Volt = 15*
Max Retard
+12V LNC-2000 Retard
Activation Input
(Orange)
Timing Retard
1 or 2 Output
(Pink or Tan)
The “Maximizer 4” name and logo, as well as the “NX” name and logo, are
property of Nitrous Express Inc.
LNC-2000 Timing Retard Activation (Cont...)
Page 24 of 31