Lingenfelter EFILive AutoCal Instructions v0.6 - Manual (Page 4)

Page 3.
14. And it will then go to the “RECORD DATA”
screen
15. Press OK to begin recording data
Screen will then display:
“CREATING LOG FILE”
“STARTING SCANNER”
16. And it will then show:
17. TIME 00:00:00 with the digits incrementing
up indicating the length of the logged data
file. The data can be viewed while the data
logging is taking place by using the down
arrow to scroll between variables.
18. When you are done data logging (you have
recorded the desired events), use the left
up arrow button (PREV) until you get to the
<EXIT screen. Then press the center “OK
button.
19. Screen will then display “SAVING E38_0003”
(or some other similar incremented file name)
20. Screen will then display “SAVED AS
E38_0003”