Luxul XAP-1500 - Manual (Page 18)

18
XAP-1500
a: 14203 Minuteman Drive, Suite 201, Draper, UT 84020-1685 | luxul.com | 801-822-5450
LUX-UG-XAP-1500 Vers: 07314
NOTE: To remove a SSID, select it from the profi le drop down menu and
press the Delete key.
„
VLAN ID: This fi eld is used to set the Port VLAN Identifi er (PVID) associated with a
particular SSID. This feature is used to create multiple wireless networks that are not
accessible to each other (i.e. Home, Guest, Control, etc.). Up to 6 VLAN ID’s can be set
(one for each Profi le). A smart/managed switch is required to fully utilize this feature
(see the Luxul XMS-1024 XMS-1024P or XMS-1008P).
NOTE: VLAN ID only shows as an available option when VLAN Tagging is
enabled.
To change or set a VLAN ID, simply enter a number from 1-6, then click Save, and then
Reboot for the change to take effect.
NOTE: Removing all SSID’s from VLAN ID 1 will result in the AP no longer
allowing access to the web management page.
5.4 Network
„
VLAN Tagging: Turns on the VLAN Tagging function for all SSIDs. This can be used to
create two wireless networks that are isolated from each other with a VLAN Trunking
switch. All current Luxul routers (except the XBR-2300) and managed switches (except
the XMS-1008P) support VLAN Trunking.