LW Measurements HRB 1002TL - Manual (Page 11)

11
2.2 Application, conformity
2.2.1 Correct use of the weighing machine
The weighing machine may only be used for the weighing of solid-materials and of liquids filled into
secure containers.
The maximum allowable load of the weighing machine must never be exceeded, otherwise the weighing
machine may be damaged.
In using the weighing machine in combination with other appliances as well as with appliances produced
by other manufacturers, the appropriate regulations for the safe use of the relevant attachments and their
application in accordance with instructions must be observed.
2.2.2 Conformity
The weighing machine has been manufactured and tested in accordance with the standards and
recommendations set out in the declaration of conformity.
The power adapter produced for the operation of the weighing machine and intended exclusively for this
application, complies with the appropriate electrical protection class.
2.3 Data and parameters
2.3.1 Technical data
The following applies to HRB series
Power supply:
. Input: 110 or 230V AC (+/-15-20%); 50 to 60Hz
. Output: 10-12v DC 150mA
Allowable ambient conditions
Temperature: 5°C - 40°C
Relative humidity: 25% - 85%, non-condensing
If you have any questions on the technical data or require detailed technical information on your balance,
please contact your technical representative.