LW Measurements MRB 2500 - Manual (Page 12)

12
2.2 Application & Conformity
2.2.1 Correct use of the weighing machine
The weighing machine may only be used for the weighing of solid-materials
and liquids filled into secure containers.
The maximum allowable load of the weighing machine must never be
exceeded; otherwise the machine may be damaged.
In using the weighing machine in combination with other appliances as well as
with appliances produced by other manufacturers, the appropriate regulations
for the safe use of the relevant attachments and their application in
accordance with instructions must be observed.
2.2.2 Conformity
The weighing machine has been manufactured and tested in accordance with
the standards and recommendations set out in the declaration of conformity.
The power adapter produced for the operation of the weighing machine and
intended exclusively for this application complies with the appropriate electrical
protection class.
2.3 Data and parameters
2.3.1 Technical data
The following applies to all MRB series weighing machines:
Power supply:

Input: 120V or 230V AC (+/-15-20%); 60Hz

Output: 9v DC 100mA
Allowable ambient conditions:

Temperature: 0°C - 40°C / 32 - 104ºF

Relative humidity: 25% - 85%, non-condensing
If you have any questions on the technical data or require detailed technical
information on your balance, please contact your technical representative.