LW Measurements MRB 2500 - Manual (Page 14)

14
3.2 Scope of delivery
Inspect delivery for completeness immediately upon unpacking all
components.
Checklist for complete delivery
Component delivered present
yes / no
Weighing unit body
Weighing platter
Power adapter
Operating manual
3.3 Assembling your weighing machine
The weighing machine is delivered in partly dismantled condition. Assemble
the individual components in the following sequence:

Place the base unit in position and add the weighing platter.

Insert the power adapter cable plug into the socket at the rear of the
balance.
3.4 Choice of a suitable location
The environment in which your weighing machine is used is very important. Air
movement, temperature changes, vibrations, direct sunlight, etc. all influence
the performance of high precision weighing machines. Therefore, place your
weighing machine on a solid, sturdy surface that is free of air currents,
vibration and not in direct sunlight. The surface should not be magnetic and
should be located away from doors, windows, heaters, air conditioners and
fans.
To summarize:

Put the weighing machine on a solid, firm and preferably vibration-
proof, horizontal base

Make sure that the weighing machine cannot be shaken or knocked
over

Protect from direct solar radiation

Avoid drafts and excessive temperature fluctuations