LW Measurements MRB 2500 - Manual (Page 19)

19
housing with a soft brush or a soft, lint-free cloth, moistened with a mild soap
solution. The platter can be cleaned under running water. Ensure that both
parts are completely dry before they are re-installed on the scale.
Never use solvents, acids, alkalis, paint thinners, scouring powders or other
aggressive or corrosive chemicals for cleaning, since these substances attack
the surfaces of the scale housing and may cause damage
8 Transport and storage
8.1 Transportation and shipping
Your weighing machine is a precision instrument. Treat it carefully. Avoid
shaking, severe impacts and vibration during the transportation.
Take care that there are no marked temperature fluctuations during the
transportation and that the weighing machine does not become damp
(condensation).
8.2 Storage
If you would like to take the weighing machine out of service for an extended
period, remove all batteries from the battery compartment to avoid leakage
which may cause damage to the machine. Disconnect the machine from the
electricity supply, clean it thoroughly (see Section 6. Maintenance and
servicing) and store it in a place which meets the following conditions:

No violent shaking, no vibrations

Minimum temperature fluctuations

No direct solar radiation

Minimum moisture
The weighing machine should preferably be dispatched and transported in the
original packaging to avoid transportation damage.
The weighing machine should preferably be stored in the original packaging,
since this provides optimal protection for the weighing machine.