LW Measurements LCT 110 - Manual (Page 17)

17
7. [CE] KEY is used for canceling the numeric setting data or cancels the previous unit weight data.
8. [QTY/SET] KEY is used for the alternation of changing normal counting and quantity check
operation.
9. [M+] MEMORY KEY is used when accumulating the count data; this data is memorized by
pressing this key and can be accumulated up to 99 times.
4.2 Program options
Besides performing accurate simple weighing, your versatile weighing machine can perform a number of
useful applications: piece counting, high / low check-weighing, weight unit conversion.
4.2.1 Piece counting
SAMPLE SETTING: There are two sample setting methods:
4.2.1.1 Number setting: When counting pieces with an unknown unit weight

Place a pre-counted number of reference samples (for example, 10 units) on the weighing pan,
either directly or, using a container (do not forget to tare the container weight first)
–

The total weight is displayed.

Enter the corresponding number of samples (for example, 10 units) using the numeric keys and
press the SAMPLE/UNIT key.

The average piece weight of the samples shows at UNIT WEIGHT

The number of samples shows at TOTAL(pcs); Add in more samples and it will show the total
number of pieces.

Press CE key to clear any previous setting. Press [CE] key to cancel the previous unit weight and
sample setting.
4.2.1.2 Unit weight setting: When counting pieces with a known unit weight

Press CE key to clear any previous setting. Press [CE] key to cancel the previous unit weight and
sample setting.

Place samples on the scale.

Key in the average piece weight using the numeric keypad.

Press UNIT WEIGHT on the keypad.

The total number of pieces will be shown at TOTAL (pcs). Add more units to be counted.

Press CE key to clear any previous setting. Press [CE] key to cancel the previous unit weight and
sample setting.