LW Measurements LCT 110 - Manual (Page 16)

16
4 Working with the application menu using the Intelligent Key-Pad
4.1 Display messages and key functions
4.1.1 Display messages:
1. The WEIGHT DISPLAY indicates the gross or net weight on the weighing pan.
2. The UNIT WEIGHT DISPLAY indicates the average or set unit piece weight.
3. TOTAL DISPLAY is the accumulated total pieces on the weighing machine.
4. LOW SAMPLE INDICATOR activates in the display when the sample number is not significant
enough to allow accurate counting.
5. LOW PIECE WEIGHT INDICATOR activates in the display when the sample unit weight is not
significant enough for accurate counting.
4.1.2 Key Functions:
1. The ZERO key allows the subtraction of multiple container values through the weighing range
and is used to set or re-adjust the weighing machine in correct zero position.
2. The TARE allows the user to subtract the container value and returns the display to zero
3. NUMERIC (0-9) KEY is used for setting numeric data for sample number, sample weight or to
limit the HI/LO settings.
4. DECIMAL POINT (.) KEY is used to set the decimal position of the sample weight.
5. [SAMPLE/UNIT] KEY is used when setting the counted sample numbers on the weighing pan into
weighing machine memory.
6. [UNIT WEIGHT] KEY is used when setting the known unit weight data into the weighing machine
in normal operation.