Step 7, Step 6 – Mighty Mule FM502 Dual Swing - Blue Board User Manual

Page 27

Advertising
background image

23

Step 7

Plug the transformer into the electrical outlet.
(Use of a surge protector with the transformer is strongly
recommended.)

HINT: Keep a few mothballs in the control box to
discourage insects from entering it and damaging the
control board.

NOTE: If transformer will be located outside be sure
to enclose in a weatherproof cover (not included).

Step 6

Strip

1

/

2

" of insulation from the ends of the low voltage

wire. Attach these stripped ends to the transformer
terminals.

A dab of household petroleum jelly on each terminal will
help prevent corrosion.

Make sure the exposed wires do not touch each other!

SURGE PROTECTOR

Transformer

Advertising