Control box installation, Transformer wiring installation, Connecting the battery – Mighty Mule MM600ET-PRO User Manual
Page 24: 12 vol t, Important: d
21
CAUTION: Please
call your power company
before you dig. Failure to
do so could cause injury
or even death.
9
Top View
Min 3 Ft
Max 1,000 Ft
GTO Transformer
Mounts Here
8
Locate power outlet and identify wire path to control box.
NOTE: If OUTLET is OUTSIDE use weatherproof cover.
Dig trench and lay wire from AC power source to control box.
Use only 16 guage multi-stranded, low voltage, direct burial
wire (RB509). NOTE: DO NOT use telephone wire or solid core
wire. NEVER splice wires together. We recommend running wire
in PVC conduit.
Transformer Wiring Installation
I
f
usIng
optIonal
solar
panel
charger
Instead
of
transformer
to
charge
the
battery
,
go
to
page
23.
Important: d
o
not
connect
both
solar
panel
and
transformer
.
Turn control box OFF. Place the 12 Volt Lawn Tractor or Auto-
motive battery and weatherproof battery box within 6 feet of the
control box Attach the battery harness wires from the control
box to the battery terminals using bolts, washers and nuts. Be
sure to attach the RED wire to the POSITIVE terminal and the
BLACK wire to the NEGATIVE terminal.
Tighten the bolts, washers, and nuts and place the cover on the
weatherproof box. IMPORTANT: Do not connect the trans-
former or solar panel directly to the battery. This will cause the
system to fail.
Connecting the Battery
Control Box Installation
12 VOL
T
12 VOL
T
NEGA
TIVE
POSITIVE
1
RED WIRE TO
POSITIVE (+) TERMINAL
BLACK WIRE TO
NEGATIVE (–) TERMINAL
2
12 VOL
T
12 VOL
T
NEGA
TIVE
POSITIVE
OFF