Dynex DX-R27TV - Manual (Page 11)

Using the TV 11
--Set the volume to the minimum setting, then press the vo lume down
button on the TV and the 0 button on the remote control at the
same time.
--Hold for more than two seconds, then reset the password .
Setting a password
To set a password:
1 Press MENU/ENTER. The menu screen appears.
2 Press the VOL + and VOL - buttons to select the OPTION menu.
3 Press the CH + and CH - buttons to select V-CHIP.
4 Press the VOL + button. The password entering screen appears.
5 Select and enter a password (4 digits) using the 0-9 number
buttons, then press MENU/ENTER.
6 Enter the same password again to confirm, then press MENU/
ENTER to set the password.
7 Press EXIT to return to the normal screen.
Setting the V-Chip
To set the V-Chip:
1 Press MENU/ENTER. The menu screen appears.
2 Press the VOL + and VOL - buttons to select the OPTION menu.
3 Press the CH + and CH - buttons to select V-CHIP.
4 Press the VOL + button. The password entering screen appears.
5 Enter your 4-digit password using the 0-9 number buttons, then
press MENU/ENTER. The V-CHIP menu appears.
6 Press the CH + and CH - buttons to select V-CHIP SET, then press
the VOL + button. The V-CHIP SET menu appears.
7 Press the CH + and CH - buttons to select TV RATING, then press
the VOL + and VOL - buttons to display the desired rating.
• OFF—TV RATING is not set
• TV-Y—All children
• TV-Y7—7 years old and above
• TV-G—General audience
• TV-PG—Parental guidance
• TV-14—14 years old and above
• TV-MA—17 years old and above
When you select TV-Y7, TV-PG, TV-14, or TV-MA, press -/DISPLAY
to further define the rating. Press the CH + and CH - buttons to
select the desired rating you want. Press the VOL + and VOL -
buttons to select the setting ON or OFF.
8 Press the CH + and CH - buttons to select MOVIE RATING, then
press the VOL + button. The RATING menu appears.
9 Press the CH + and CH - buttons to select the rating, then press
the VOL + and VOL - buttons to select ON or OFF for each rating.
• G—All ages
• PG—Parental guidance
• PG-13—Parental guidance less than 13 years old
• R—Under 17 years old parental guidance suggested
• NC-17—17 years old and above
• X—Adult only
10 Press MENU/ENTER twice to return to the V-CHIP menu, then
press the CH + and CH - buttons to select V-CHIP.
11 Press the VOL + and VOL - buttons to elect ON. Your settings are
now set into memory.
12 Press EXIT to return to the normal screen.
Watching a protected show
To watch a program that is blocked by the V-Chip:
1 Press MUTE.
2 Enter the password, then press MENU/ENTER.
After you enter the password correctly, the protection is
temporarily overridden. If the television is turned off, or if the
channel is changed, the V-Chip restriction is reactivated.
Changing the password
To change the password:
1 Press MENU/ENTER. The menu screen appears.
2 Press the VOL + and VOL - buttons to select the OPTION menu,
then press the CH + and CH - buttons to select V-CHIP.
3 Press the VOL + button to display the password entering mode.
Use the number buttons (0-9) to enter your password, then press
MENU/ENTER. The V-CHIP menu appears.
4 Press the CH + and CH - buttons to select CHANGE PASSWORD,
then press the VOL + button to display a blank password screen.
5 Enter a new password using the number buttons (0-9), then press
MENU/ENTER.
6 Enter the same password again to confirm, then press MENU/
ENTER.
7 Press EXIT to return to the normal screen.
Downloading the additional V-Chip rating
system
As a supplement to the standard V-Chip rating system, your television is
equipped to download an additional rating system, if such a system
becomes available in the future.
Notes:
You can only download the additional V-Chip rating system when your
television is receiving a digital signal.
When you download the additional rating system, it may take some time
for the download to occur.
The V-Chip rating information and system are not determined or not
controlled by the television or Dynex.
The downloadable V-Chip rating system is an evolving technology;
therefore, availability, content, and format may vary.
The standard V-Chip rating system is available whether your television is
receiving a digital signal or not, and will block both analog and digital
programs. To set program blocking using the standard V-Chip rating
system, select V-CHIP in step 5.
To download the additional V-Chip rating system (when available):
1 Press TUNER to select the Digital mode.
2 Press MENU/ENTER. The menu screen appears.
3 Press the VOL + and VOL - buttons to select the OPTION menu,
then press the CH + and CH - buttons to select V-CHIP.
4 Press the VOL + button to display the password entering mode.
Use the number buttons (0-9) to enter your password, then press
MENU/ENTER. The V-CHIP menu appears.
5 With the television receiving a digital signal, press the VOL + and
VOL - buttons to select V-CHIP SET (DTV), then press the CH -
button.
6 If the television is not storing the additional rating system, the TV
will begin downloading the new rating system. This may take
some time to download completely.
7 Press the CH + and CH - buttons to select RRT SET, then press the
VOL + button.
8 Set your preferences for the content rating limits for the additional
rating system.
Setting the clock
Note:
After a power failure or disconnection of the power, the clock settings will
be lost. When this happens, reset the present time.
To set the clock:
1 Press MENU/ENTER, then press the VOL + and VOL - buttons to
select the SETUP menu.
2 Press the CH + and CH - buttons to select CLOCK SET, then press
the VOL + and VOL - buttons. The CLOCK SET menu appears.