Mossberg 59 Line Launcher - Manual (Page 4)

4
Line Launcher Barrel Assembly
Do not use the Line Launcher barrel for anything other than line launching.
Assemble the Line Launcher barrel to the shotgun as directed in the shotgun
Owner’s Manual.
The Projectiles
Two types of projectile heads are available. Either head can be thread-assembled
to the shaft.
The “floating” projectile has a translucent bottle head. Under calm conditions the
floating projectile can travel approximately 250 feet.
The solid point non-floating head is designed for longer range applications. Under
calm conditions the non-floating projectile can travel approximately 700 to 750 feet.
Select the type of projectile head to be used, hand tighten firmly to the projectile shaft.
Line
The line is “inside coiled” to facilitate its high speed take-off. The coiled line has no
shape support once the wrapper has been removed. Carefully remove the line from
its wrapper. The stationary “outer” coil line can be attached to a heavy hauling line.
The traveling “inner” coil line end must be attached to the projectile shaft.