Mossberg Recoil Reduction/ Mathews Stock - Manual (Page 10)

PART N0. 101308 REV. A 10
TO CHANGE REMOVABLE COMBS
Before making any comb changes, move the safety button fully rearward to
the “ON” (SAFE) position and visually and physically check the chamber,
elevator, and magazine tube to be certain the shotgun is unloaded. Also, be
sure to keep the action open and the muzzle pointed in a safe direction.
Refer to your firearm’s owner’s manual for additional safety and functional
information.
a) Using a 5/32 inch Allen head wrench unscrew and remove the comb retaining
screw found at the top center of the removable comb (Fig. 12).
b) Place the desired comb into position. Insert the comb retaining screw and tighten
until snug. Do not overtighten as this will damage the internal assembly
components.
Fig. 12 Low Comb
Fig. 13 High Comb