NEMO Equipment MET 1P - Manual (Page 3)

GUARANTEE
NEMO QUALITY RECOMMENDED
INNOVATIONS
NEMO PRODUCT
TECHNOLOGY
POLE SUPPORTED
TECHNOLOGY
AIRSUPPORTED
EXTREME CONDITIONS
EXTREME CONDITIONS POLE SUPPORTED
TECHNOLOGY
EXTREME CONDITIONS
STATISTICS
NEMO PRODUCT
NEMO is constantly developing new pole tech-
nology, hardware, and frame configurations to
maximize the strength, wind resistance, interior
volume, weight, and usability of our tents. We pur-
sue simplicity and pure geometric forms wherever
possible. Classic arch shapes are used to fend off
top loads and catenary curves transfer tension
through fabric panels. Every design element is
deliberate and has a functional purpose, much
like nature itself.
META™ 1P HIGHLIGHTS
Smart design and straightforward functionality
make the setup of Meta™ 1P a cinch. Simply stake
out each of Meta™ 1P’s anchor points and insert/
expand your trekking pole until the tent is properly
tensioned, about 52 inches. An oversized grommet
locates the tip of your trekking pole and a rein-
forced area at the top of the tent receives the pole
handle. A total of seven anchor points keep Meta™
1P nailed to the ground, vented, and weatherproof.
A combination of venting options help combat
condensation and promote air circulation. A large
rear vent can be deployed by staking out the
reflective guy-out cord at the back of the tent. A
reinforced hoop keeps the upper vent open at all
times, allowing low-to-high ventilation.
Vestibule options give you all-weather versatility.
The vestibules can be used in multiple configura-
tions depending on the weather or privacy needs.
When the skies are clear, both vestibule doors can
be rolled back to expose the full mesh wall. When
rain isn’t a concern, but you need protection from
the wind, keep one side of the vestibule rolled
up and the other side deployed. In rainy weather,
deploy both sides for full protection from the
elements.