Nisus Writer Express - Manual (Page 128)

108 Setting Up a Document’s Page
The steppers increase and decrease in increments of
• .10 cm
• .10 inches
• .10 mm
• .10 pc
• .10 pt
☞
This increases or decrease the margins of all selected sections relative to one another by the
increments adjusted in the steppers.
Mirror page placement
You may want to print your document for binding so that the text appears on both sides of a piece
of paper. In that case you would probably want your margins to “mirror” or “reflect” depending on
whether they are on the odd or even page.
1. Open the Tooldrawer and select the Sections palette group from the icons at the top, or, choose
Section from the Palettes submenu of the Window menu as explained in “Set the margins
numerically” on 107.
2. Click Use Facing Pages.
Figure 98
The Section palette