Making the remote work with your receiver – Dish Network 6.3 User Manual
Page 4
C-3
Quick Setup
1
UHF
PRO
RECORD
Turn your receiver and
TV on, and press SYSTEM
INFO on the front
of the receiver.
Confirm that you
see the System
Information screen.
Press RECORD on
your remote. The remote
address will probably
change on the screen.
Confirm that your remote operates your
receiver by pressing remote buttons. If
your remote has a blue number 2 key, you
may need to go to your remote TV2 location to
confirm your remote operates your receiver.
If this is not working, go back to
step
5
.
Making the Remote Work
With Your Receiver
4
3
2
1
5
6
4
REMOTE
ANTENNA
If you installed a UHF
key, make sure the
UHF antenna is
installed on the back
of the
receiver.
Green
(not black)
UHF Pro Symbol
1
UHF
PRO
UHF
UHF
PRO
1
2
UHF
PRO
If you installed one of these keys,
continue with
step
2
on this page.
If you installed this
key, go to
page
11
inside this guide.