Center of gravity (cg) – ParkZone PKZ5680 User Manual
Page 7
EN
Install included battery in the fuselage using the hook and loop straps.
Center of Gravity (CG)
140mm
(5.5 inches) forward from
fi rewall on end of fuselage
Tip: Turn the clevis clockwise or counterclockwise on the linkage.
• Pull the tube from the clevis to the linkage.
• Carefully spread the clevis and put the clevis pin in a selected hole in the
control horn.
• Move the tube to hold the clevis on the control horn.
After binding a transmitter to model receiver, set trims and sub-trims to 0,
then adjust clevises to center control surfaces.
1.
4.
5.
6.
2.
3.
Fly the model at factory settings before making changes. For pilots who wish
to fl y model for unlimited aerobatics, adjust position of linkages on servo arms
and control horns for increased travel.
Ailerons
Arms
Rudders
Horns
Ailerons
Rudders
Installing Clevises on Control Horns and Control Centering
Factory Settings
7