Remy 39MT STARTERS HARDWARE PACKAGES - Manual (Page 2)

NOTICE - Only licensed Remy International, Inc. product and component parts should be used, and the use of other parts or modifications not approved
by Remy International, Inc. will void all applicable warranties. The failure to carefully follow these Installation Instructions, set forth above, will void all
applicable warranties. DELCO REMY is a registered trademark of General Motors Corporation, licensed to Remy International, Inc. Pendleton, IN 46064.
©
2012 Remy International, Inc. All rights reserved 2
Technical support: USA 800 854 0076, Mexico 01 800 000 7378, Brazil 0800 703 3526, South America 55 11 2106 6510 or visit
delcoremy.com
38MT PACKAGE CONTENTS
Description PART # QTY Torque Values
O-Ring 10511919 2
Stop Pinion 10511745 1
Ring Pinion 10511746 1
Spring Pinion 10511744 1
Bolt Solenoid 10516836 2 7.7-9.8 Nm (68-86 lb in)
Solenoid G, B+ and M Terminals Nut 10510842 3
Ground Terminal - 24.5-27.5 Nm (18-20 lb ft)
Solenoid B+ terminal - 24.5-7.5 Nm (18-20 lb ft)
Terminal M - 19.6-22.5 Nm (14-16 lb ft)
Solenoid S Terminal Nut 10517133 1 2.0-2.5 Nm (18-22 lb in)
Roll Pin DE Housing 1875690 1
Bolt IMS 10517131 2 7.7-9.8 Nm (68-86 lb in)
Bolt CE Housing 10516965 2 2.4-3.0 Nm (21-26 lb in)
Spring Washer Solenoid 10517139 1
Roll Pin Shift Lever 10511666 1
29MT PACKAGE CONTENTS
Description PART # QTY Torque Values
CE O-Ring 10510150 1
DE O-Ring 10510151 1
Retainer Ring Pinion 10510046 1
Pinion Retainer 10510045 1
Spring Pinion 10510044 2
Solenoid M Terminal Nut 10517179 1 7.3-9.3 Nm (64-82 lb in)
Solenoid S Terminal Nut 10517187 1 2.0-2.5 Nm (18-22 lb in)
Solenoid B+ Terminal Nut 10517190 1 15.0-18.0 Nm (11-13 lb ft)
Solenoid Screw 10517192 2 7.7-9.8 Nm (68-86 lb in)
Ball 10510082 1
Bolt IMS 10517131 2 7.7-9.8 Nm (68-86 lb in)
Bolt CE Frame 10517191 2 2.4-3.0 Nm (21-26 lb in)
Pin 10510138 1
Shift Lever Pin 10510074 1
IMS S Terminal Nut 10517170 1 3.9-5.1 Nm (35-45 lb in)