Rocktron RepliTone MP - Manual (Page 5)

5
Turn the MASTER VOLUME control all the way down on the RepliTone
MP and Power Amp.
Using high quality 1/4" guitar cables (standard guitar cables are OK)
connection the RepliTone MP to Power amp as such:
-RepliTone MP Left Pre-amp "OUT" to - "IN" on the Power Amp
-RepliTone MP Right Pre-amp "OUT" to - "IN" on the Power Amp"
Plug the supplied power adapter into the AC INPUT socket on the rear
panel, and plug the other end into an AC wall socket.
Connect your guitar to the INPUT jack.
Press the POWER button on the RepliTone MP and then power on the
Power amp.
Select a PRESET position (or MANUAL).
Select an AMP Model.
Set the GAIN and LEVEL controls to your taste. Adjust the Master
Volume on the RepliTone MP and on the Power Amp to a comfortable
level. Set the BASS, MID, and TREBLE.
Set the EFFECTS SELECT knob to the desired Effect and modify as
needed with the EFFECTS ADJUST control.
Play!
RepliTone MP Quick Start
Modeling Preamp - Stereo - Single Rack Space Preamp with Multi-effects and amp
models. The HEADPHONES and LOOP SEND/RETURN jacks are stereo.
Mono, 60 watt combo amp with a single 12 inch speaker. The HEADPHONES
and LOOP SEND/RETURN jacks are stereo.
Stereo, 100 watt combo amp with two 12 inch speakers. The
HEADPHONES and LOOP SEND/RETURN jacks are stereo.
MP
1 x 12
2 x 12
Available RepliTone Products 3.
2.