Rocktron RepliTone MP - Manual (Page 9)

9
12
13
14
DELAY LEVEL control
Adjusts the overall level of the delayed signal at the output relative to the direct signal and other effect
signals. (Delay is always available.)
DELAY TIME button and LED
Adjusts the current delay time. To set the delay time, tap the button twice at the interval desired (up to
one second). The LED flashes to indicate the set time. For the longest delay time tap button only once.
EFFECT ADJUST control
Adjusts one effect parameter, depending upon the effect selected (see Effect Select Control section (16)
for more detailed information).
EFFECT SELECT EFFECT ADJUST knob controls.
Chorus Depth Depth of Chorus
Chorus Level Level of Chorus
Flanger Depth Depth of Flanger
Flanger Res Resonance of Flanger
Delay Regen Regeneration of Delay
Delay Pan Pan of delay - knob turned full left - delay is on left
knob turned full right - delay is on right.
Detune Pitch Amount of Detune Pitch
Detune Level Level of Detune Pitch
Bypass Nothing
HUSH Threshold (HUSH is always active)
Compressor Threshold
Wah Frequency of Wah - knob sets only the one
frequency - but you can use an expression pedal to
get the wah wah effect
Rotary Slow Speed of Rotary
Phaser Depth of Phaser
Tremolo 1 Depth of Tremolo 1
Tremolo 2 Depth of Tremolo 2
RATE button & LED
Sets the modulation rate of the selected effect. To set, press the button twice at the rate you want. The
LED flashes to indicate the setting. When the Rotary effect is selected, tap the button once to change
between the two rates. To set the slowest rate tap the button just once.
EFFECT SELECT control
Selects one of the available effects and selects which parameter is controlled with the EFFECT ADJUST
control.
Chorus Depth Bypass
Chorus Level Hush
Flanger Depth Compressor
Flanger Res Wah
Delay Regen Rotary
Delay Pan Phaser
Detune Pitch Tremolo 1 (Sine wave modulation)
Detune Level Tremolo 2 (Square wave modulation)
15
16