Rocktron All Access - Manual (Page 45)

42
MIDI, Page 7 of 7 - MIDI Receive Channel
The seventh page of the MIDI program, MIDI Receive Channel, determines
the MIDI channel that incoming program changes must be on for the All Access™
to respond. (This feature is operable only in Bank Mode - see SETUP, Page 1).
To define the MIDI receive channel:
(Œ) With the 2ND L.E.D. still lit, press the "ð" switch to access the next page
of the MIDI program, MIDI Receive Channel. (If the All Access™ is not
already in the MIDI editing mode, press "2ND", then "MIDI", followed by
"ð" six times.)
() Use the "INC" and "DEC" switches directly below the displayed MIDI
Receive channel to select the MIDI channel that the All Access™ is to
receive MIDI commands on.