Rocktron All Access - Manual (Page 49)

46
COPY, Page 2 of 4 - Bank Copy
The second page of the COPY program, Bank Copy, allows for an entire
bank of presets to be copied from one bank location to another.
When the All Access™ is configured to bank by 5 presets at a time:
• Bank Copy will copy 5 presets
• Bank 1 = Presets 1-5
Bank 2 = Presets 6-10
Bank 3 = Presets 11-15
...and so on
If configured to bank by 10 presets at a time:
• Bank Copy will copy 10 presets
• Bank 1 = Presets 1-10
Bank 2 = Presets 11-20
Bank 3 = Presets 21-30
...and so on
If configured to bank by 15 presets at a time:
• Bank Copy will copy 15 presets
• Bank 1 = Presets 1-15
Bank 2 = Presets 16-30
Bank 3 = Presets 31-45
...and so on
To copy a bank of presets to another bank location:
(Œ) With the 2ND L.E.D. still lit, press the "ð" switch to access the next page
of the copy program, Bank Copy. (If the All Access™ is not already in the
COPY editing mode, press "2ND", then "COPY", followed by "ð".)
() Use the "INC" and "DEC" switches directly below the displayed bank to be
copied to select the desired bank.
(Ž) Use the "INC" and "DEC" switches directly below the displayed bank
destination to select the desired bank location to copy to.
() Press the "CTR STORE" button to initiate the copy.
Note:
If the All Access™ is
configured to bank by one
preset at a time (see SETUP,
Page 2), this page is not
available.
G