Rocktron Unity Tuner - Manual (Page 4)

Introduction:
Congratulations on your purchase of the Rocktron Unity Tuner.
The Unity Tuner is a true “on-stage” tuner for any gig. The Unity
Tuner’s large LED NOTE display makes it easy to see what note
you are tuning, even from a distance. Several Red LEDs are also
used to help you easily determine if you are sharp or flat and by
how much.
A unique feature to the Unity Tuner are the photocells. These
photocells sense the lighting situation you are playing in and
adjust the brightness of the LED Note Display to accommodate
that lighting. When you are playing outside on a sunlit stage,
the photocells sense that the area is bright and increase the LED
intensity making the LEDs brighter and easier to see. The opposite
effect happens when playing on a dark, low light situation. The
photocells sense that the lighting is low and dim the LED Note
Display making it easier on the eyes.
The Unity Tuner is equipped with a “STROBE” function for those
who require extremely accurate tuning. The STROBE function is a
sensitive tool that really allows you to dial in the exact tuning.
Two outputs are provided as well. The jack marked “OUTPUT”
provides a constant signal path to other effects or amps when you
turn on the tuner. This allows you to hear what you are tuning
through your amp. When the “OUTPUT (MUTE)” is used, the
Unity Tuner cuts the signal to the next effect or amp and allows you
to tune in silence, This is a very useful on-stage tool.
You are now ready to tune in all playing situations!