Rocktron Unity Tuner - Manual (Page 7)

Descriptions continued.........
CALIBRATE button - this button is used to calibrate the tuner to match
the pitch of any instrument or audio source (like an old piano or tape
player). For details on this function - see section titled “Calibration.”
OUTPUT Jack - This jack provides output to your amp or the next pedal
in the signal chain. Use a 1/4” guitar cable to plug into the next effect or
into a guitar amplifier. This jack provides a contant output whether the
tuner is on or off and does not mute the output.
OUTPUT JACK (MUTE)- This jack provides output to your amp or the
next pedal in the signal chain. Use a 1/4” guitar cable to plug into the
next effect or into a guitar amplifier. This jack will MUTE the output to
the next pedal or amp when the tuner is turned on. This is ideal for silent
tuning on stage.
11
12
13