Rocktron Tri-Wah - Manual (Page 11)

Specifications
Maximum Input
Input Impedance
Output Impedance
Wah frequency Range
Current Consumption
Power Requirements
+10dBu
1M ohm
1K ohm
400Hz (Heel Down) to 2KHz
(Toe Down)
35ma
9VDC <=300ma
* CE Approved *
The Tri-Wah (as with all Wah Wah pedals) are normally put in the
beginning of your signal chain. Although, you may place your wah at any
place in your signal chain, it usually sounds best at the beginning -
directly from your guitar (or bass).
Hints and Tips